SMITH HR-2-XBC Cam Follower and Track Roller - Stud Type

d1:60 mm; Hydraulic nut:HMV 13 E; B:15 mm; d:65 mm; B1:65 mm; G:M 65x2; Mass adapter sleeve assembly:0.53 kg; Lock nut:KMFE 13; d3:85 mm;

Basic Static Radial Load Rating Co:196000 N; B:73.00 mm; D:190.0000 mm; d:90.000 mm; Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:2000 rpm; Basic Dynamic Radial Load Rating C:212000 N; Sealed Speed Rating n3:2000 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3000 rpm;

Grease Speed Rating Open/Shielded n1:4000 rpm; Oil Speed Rating Open/Shielded n2:4800 rpm; B:20.00 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:44000 N; d:110.000 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:43600 N; Sealed Speed Rating n3:2500 rpm; D:1

rb max.:3.3 mm; r3,4 min.:3.3 mm; d:31.75 mm; Basic dynamic load rating C:86.5 kN; B:27.783 mm; T:29.37 mm; C:23.02 mm; Mass bearing:0.62 kg; Reference speed:7500 r/min; db min.:39.5 mm;

Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:950 N; Basic Dynamic Radial Load Rating C:2210 N; Oil Speed Rating Open/Shielded n2:43000 rpm; d:6.000 mm; D:19.0000 mm; B:6.00 mm; Fillet Radius ra:0.30 mm; Accessories:One Seal; Sealed Speed Rating n3:26000 rpm;

a:3 mm; B:30 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; h:51 mm; Mass bushing:0.28 kg; D:60 mm; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.15;

Basic Dynamic Radial Load Rating C:72800 N; d:45.000 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6000 rpm; B:42.90 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:53000 N; Sealed Speed Rating n3:4500 rpm; Accessories:Two Shields;

Fillet Radius ra:2.00 mm; B:27.00 mm; d:40.000 mm; Basic Dynamic Radial Load Rating C:68200 N; Oil Speed Rating Open/Shielded n2:6500 rpm; Grease Speed Rating Open/Shielded n1:5300 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:52000 N; D:110.0000 mm;

Accessories:8000 One Seal; Width - Inner Ring B1:12.20 mm; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Basic Radial Load Rating-Static SCO:2400 N; d:10.000 mm; Basic Interchange BCA:8500; Fillet Radius ra:0.64 mm; D:30.0000 mm; Basic Radial Load Rating-Dynamic DC:5070 N; Basic Interc

R1:66.675 mm; N1:22.225 mm; L:387.35 mm; J min.:295.275 mm; Adapter sleeve assembly:SNW 117x3; H1:114.3 mm; J max.:333.375 mm; P60°:104 kN; P150°:35.6 kN; Pa:10.5 kN;

Sealed Speed Rating n3:2100 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:3000 rpm; d:90.000 mm; B:54.00 mm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; D:225.0000 mm; Basic Static Radial Load Rating Co:150000 N; Fillet Radius ra:3.00 mm

Fatigue load limit Pu:0.132 kN; Calculation factor f0:12.2; Reference speed:60000 r/min; B:10 mm; Limiting speed:36000 r/min; d:12 mm; da min.:16.2 mm; d1 ≈:18.45 mm; ra max.:0.6 mm; D:32 mm;

Accessories:One Shield; Basic Dynamic Radial Load Rating C:163000 N; B:48.00 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Static Radial Load Rating Co:125000 N; d:80.000 mm; D:200.0000 mm; Sealed Speed Rating n3:2300 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:4000 r

J:100 mm; D:120 mm; Mass:0.69 kg; Purpose/ Application:Slurry fertilizer; Housing material:Glass fibre-reinforc; Flange design:Flange with metric a; GF:M8x1.25; Basic static load rating C0:31 kN; b:1.3 mm; Sealing system:SKF Mudblock seal;

R1:122.237 mm; P60°:557 kN; dc:193.675 mm; S:4.763 mm; Pa:145 kN; Cap bolt, SAE grade:8; H:419.1 mm; Lock nut:AN 40; L:749.3 mm; PG:1/4 NPT;